Model |
R10 |
Measurement |
Measuring points sooner, faster and in harsh |
environments with Trimble HD-GNSS technology |
Increased measurement productivity and traceability |
with Trimble SurePoint electronic tilt compensation |
Worldwide centimeter level positioning using Trimble |
CenterPoint RTX satellite delivered corrections |
Reduced downtime due to loss of radio signal with Trimble xFill technology |
Advanced Trimble Maxwell 6 Custom Survey GNSS chips with 672 channels |
Future-proof your investment with Trimble 360 GNSS tracking |
CenterPoint RTX, OmniSTAR HP, XP, G2, VBS positioning |
QZSS, WAAS, EGNOS, GAGAN |
Positioning Rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz |
Code Differential GNSS Positioning |
Horizontal |
0.25 m + 1 ppm RMS |
Vertical |
0.50 m + 1 ppm RMS |
SBAS differential |
typically <5 m 3DRMS |
positioning accuracy |
Static GNSS Surveying |
High-Precision Static |
Horizontal |
3 mm + 0.1 ppm RMS |
Vertical |
3.5 mm + 0.4 ppm RMS |
Static and Fast Static |
Horizontal |
3 mm + 0.5 ppm RMS |
Vertical |
5 mm + 0.5 ppm RMS |
Real Time Kinematic Surveying |
Single Baseline <30 km |
Horizontal |
8 mm + 1 ppm RMS |
Vertical |
15 mm + 1 ppm RMS |
Network RTK |
Horizontal |
8 mm + 0.5 ppm RMS |
Vertical |
15 mm + 0.5 ppm RMS |
RTK start-up time |
2 to 8 seconds |
for specified precisions |
Trimble CenterPoint RTX |
Horizontal |
4 cm |
Vertical |
9 cm |
RTX convergence time |
30 minutes or less |
for specified precisions |
RTX QuickStart convergence |
5 minutes or less |
time for specified precisions |
Trimble xFill |
Horizontal |
RTK + 10 mm/minute RMS |
Vertical |
RTK + 20 mm/minute RMS |
Physical |
Dimensions (W * H) |
11.9 cm x 13.6 cm (4.6 in x 5.4 in) |
Operating temperature |
-40ºC to +65ºC (-40ºF to +149ºF) |
Storage temperature |
-40ºC to +75ºC (-40ºF to +167ºF) |
Humidity |
100%, considering |
Ingress Protection |
IP67 dustproof, protected from temporary |
immersion to depth of 1m (3.28ft.) |
Shock and Vibration |
Tested and meets the following environmental standards |
Vibration |
MIL-STD-810F, FIG.514.5C-1 |
Electrical |
Power 11 to 24 V DC external power input with |
over-voltage protection on Port 1 and Port 2 (7-pin) |
Rechargeable, removable 7.4 V, 3.7 Ah Lithium-ion |
smart battery with LED status indicators |
Power consumption is 5.1 W in RTK rover mode with internal radio |
Operating times on internal battery |
450 MHz receive only option |
5.5 hours |
450 MHz receive/transmit option (0.5 W) |
4.5 hours |
450 MHz receive/transmit option (2.0 W) |
3.7 hours |
Cellular receive option |
5.0 hours |
Communications and Data Storage |
Serial: 3-wire serial (7-pin) |
USB v2.0: supports data download and high speed communications |
Radio Modem: fully Integrated, sealed 450 MHz wide band receiver/transmitter |
with frequency range of 410 MHz to 470 MHz: |
- Transmit power: 2 W |
- Range: 3-5 km typical / 10 km optimal |
Cellular: integrated, 3.5 G modem, HSDPA 7.2 Mbps (download), GPRS multi-slot |
class 12, EDGE multi-slot class 12, UMTS/HSDPA (WCDMA/FDD) 850/1900/2100MHz, |
Quad-band EGSM 850/900/1800/1900 MHz, GSM CSD, 3GPP LTE |
Bluetooth: fully integrated, fully sealed 2.4 GHz communications port |
WiFi: 802.11 b,g, access point and client |
mode, WPA/WPA2/WEP64/WEP128 encryption |
External communication devices for corrections supported |
on - Serial, USB, Ethernet, and Bluetooth ports |
Data storage: 4 GB internal memory; over three years of raw |
observables (approx. 1.4 MB /day), based on recording every |
15 seconds from an average of 14 satellites |
CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1 input and output |
24 NMEA outputs, GSOF, RT17 and RT27 outputs |
Webui |
Offers simple configuration, operation, status, and data transfer |
Accessible via WiFi, Serial, USB, and Bluetooth |
Supported Trimble Controllers |
Trimble TSC3, Trimble CU, Trimble Tablet Rugged PC |
Certifications |
FCC Part 15 (Class B device), 22, 24; |
R&TTE CE Mark; C-Tick, A-Tick; PTCRB; WFA |