Used Trimble R8 Surveying Equipment Receiver Trimble R8 Base and Rover with Tsc3 Controller Second Hand Gnss Rtk

• Customization: Available
• Operating Principle: Interferometric Type
• Type: Geodesic Type
• Model NO.: Trimble R8
• Carrier Frequency: Dual-Frequency
• Port Number: Sequencing Channel
• Chip: SiRF
• Certification: ISO2000
• Warranty: 3 Years
• Brand Name: Trimble
• Model Number: R8-2
• GPS: Simultaneous L1c/a,L2c,L2e,L5
• Glonass: Simultaneous L1c/a,L1p,L2c/a(Glonass M Only),L2p
• Sbas: Simultaneous L1c/a,L5
• Galileo: Simultaneous L1 Boc,E5a,E5b,E5altboc
• Bds: B1,B2
• Dimensions: 153mm*83mm
• Humidity: 100%,Considering
• Water/Dustproof: IP67 Dustproof,Protected From Temporary Immersion
• Transport Package: 1 Set Packed in 2 Cartons
• Trademark: Trimble R8-2
• Origin: China
• HS Code: 9015800090
• Production Capacity: 20000PCS/Year

Product Description

Specification:
 

The technical parameters of Trimble R8 GNSS receiver include the following aspects :
Number of channels and frequency support : The Trimble R8 GNSS receiver has 440 individual channels and supports multiple satellite systems such as GPS, GLONASS, Galileo and BDS. It supports GPS L1C/A, L1C, L2C, L2E, L5 signals, GLONASS L1C/A, L1P, L2C/A, L2P, L3 signals, as well as a variety of SBAS and Galileo signals.

Accuracy and performance : In RTK mode, the plane accuracy of Trimble R8 GNSS receiver is ≤±8mm+1ppmRMS, and the elevation accuracy is ≤±15mm+1ppmRMS; In static and fast static modes, the plane accuracy is ≤±3mm+0.5ppmRMS and the elevation accuracy is ≤±5mm+0.5ppmRMS. In addition, the low-noise GNSS carrier phase measurement has an accuracy of <1mm at a sampling rate of 1 Hz.

Tracking technology and chip : Trimble R8 GNSS receiver adopts Trimble Maxwell™ 6 measurement chip and supports Trimble 360 full-constellation tracking technology, which can fully obtain GNSS satellite signal resources and improve positioning accuracy and speed.

Data format and Remote monitoring : It supports the CMRx protocol and makes full use of all satellites in view for the most reliable RTK positioning performance. In addition, the Trimble R8 GNSS receiver supports remote online monitoring of base station status and modification of configuration files.

working environment : Trimble R8 GNSS receiver operating temperature range is -40ºC to +65ºC, storage temperature range is -40ºC to +75ºC, suitable for all kinds of harsh environment.

These technical parameters enable Trimble R8 GNSS receivers to perform well in a variety of application scenarios, especially in areas where high precision positioning and reliability are required.